MINI TTR REWINDING MACHINE TRS350
MINI TTR REWINDING MACHINE TRS350
TRS350 Specially design for TTR rewinding and slitting：
A.Rewind the longer roll to short one:
– e.g. rewinding the 110mm*450m roll to 110mm*360m
B.Change the wider roll to narrow one:
– e.g. rewinding the 110mm*450m to 2 pcs 55mm*450m roll
C.Rewind ink inside to out side or reverse.
D.Rewind 1″ roll to 1/2″ roll:
– e.g. rewind the 1″ roll 110mm* 300m to 3 pcs 1/2″ 110mm*100m roll
E.Reuse the defective roll:
– e.g. there are several defect in a 110mm*450m roll, then you can rewind it to 110mm*74m 1/2″ roll, through the defect ribbon.
It can help you save lot of ribbon and cost.
Specification
| 1 | MODEL | TRS 350 |
| 2 | MAX.SLITTING WIDTH | 350MM |
| 3 | SLITTING THICKNESS | 0.007-0.01MM |
| 4 | UNWINDING DIAMETER | 4MAX120MM |
| 5 | UNWINDING CORE SHAFT | AIR SHAFT 1 PC |
| 6 | UNWINDING COR SIZE | 1" OR 1/2" |
| 7 | REWINDING WIDTH | MINI 25MM |
| 8 | REWINDING DIAMETER | 120MM |
| 9 | REWINDING CORE SHAFT | AIR SHAFT 2PCS |
| 10 | REWINDING CORE SIZE | 1" OR 1/2" |
| 11 | BLADE TYPE | RAZOR BLADE |
| 12 | MECHINICAL SPEED | 100M/MIN |
| 13 | WORKING(SLITTING ) SPEED | 30-80M/MIN |
| 14 | POWER SUPPLY | 380V /220V (AS PER CUSTOMER REQUIREMENT) |
| 15 | AIR SUPPLY | 0.6MPa |
| 16 | N.W | 45KG |
| 17 | MACHINE DIMENSION | 700MM*350MM*410MM |
| 18 | PACKING SIZE | 1000MM*660MM*630MM |
MINI TTR REWINDING MACHINE TRS450
Mini TRS450 slitter is design for beginer or the small and medium ttr slitting company.
It works like a mini slitter,it is very widely used by label converting and printing companies to：
Re-produce the Stock Finished Roll
Rewind from ink insde to outside or Revert
Rewind from 1″ Roll to 1/2″ Roll
Slit the Finished Roll to Any Size etc..